OFFER#

DESCRIPTION OF REMANUFACTURING PROCESS:

Power Unit: Engine is completely stripped. The Head, Block, Crank, Conrods and related parts Are completely overhauled by ISO approved Engineering Company. Crank machined to a maximum of 0.030.

After assembling, engine is dyno tested.

Fuel System: Fuel tank and related components are removed, cleaned and inspected for any defects. All perishable hoses and clamps replaced with new items.

Injection pump and injectors are completely overhauled by ISO approved specialists. Tips will be new and pump re-calibrated.

Cooling System: Radiator stripped, cleaned and pressure tested. Where necessary radiator will be recored.

Exhaust System: New.

Air Intake System: Filters replaced with new.

Housing inspected for any defects and replaced when not within original specification.

Transmission System: Clutch pack replaced with new.

Gearbox stripped and all bearings and seals replaced. Transfer case stripped and sub standard components replaced with new.

Propeller Shafts: Stripped and balanced by propshaft professionals. New U-Joints.

Suspension System: U-Bolt : New.

Shackle pin and bushes: New.

Shocks: New.

Centre pin: New.

Any other substandard components replaced with new.

Reset springs.

Axles and Hubs: Stripped and all bearings and seals replaced with new.

Resetting of crown wheel & pinion.

Braking System: Hoses replaced with new.

Master and slave cylinder remanufactured.

Brake boosters overhauled.

Sub standard linkages replaced with new.

Brakes: New linings and drums skimmed and checked for any defects by Brake Specialists.

Steering System: Hydraulic hoses replaced with new.

Steering box tested, seals replaced and overhauled if necessary.

Power steering pump, pressure tested and replaced if necessary.

Set wheel alignment.

Body: Sandblasted and re-sprayed.

1^st coat : red oxide, 2^ndcoat: automotive primer compatible with colour coating.

Heating & Ventilation - Standard ventilation system serviced.

System: Air-Condiotioning: Optional.

Electrical System: New wiring loom.

New sender units : lithting. Lenses, globes and fuses.

All instrumentation refurbished.

New speedo cable.

Altenator and starter overhauled.

New batteries.

Wheels & Tyres: New 1400 x 20 tyres.

Rim stripped, sand blasted and substandard components replaced.

Pneumatic System: Air tank: Pressure tested.

All valves overhauled, checked and set.

Flex hoses replaced with new.

Flush system.

System checked for leaks.

Equipment: Hydraulic jack 15/20 ton.

Warning triangle x 2.

Wheel spanner.

Tyre inflator and hose gauge.

WARRANTY

Remanufactured: 6 Months / 40 000km / 800 hours whichever occurs first.

(Ex – Mag Truck Spares.)

Warranty is against defective material on the following items:

▪ Engine

▪ Gearbox

▪ Transfer case

▪ Axles

▪ Abuse, fair wear and tear exluded.

Specification and photos are not contractual and are subject to verification upon inspection

TAKE NOTICE!

PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PRE-EXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER AKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.

This paper was prepared by General Equipment Corp.
The paper represents an offer of a partner of General Equipment Corp.
All rights are reserved by and for General Equipment Corp..
All content and ideas of this paper are the property of General Equipment Corp.

Defense items are subject to final destination approval and granting of an export license

issued by exporting country's authorities

TYPE:	Armored Vehicles
DESCRIPTION:	Mamba Anti Mine Vehicle 4x4
PRICE:	Upon Request
PACKING:	As is, Where is

GENERAL EQUIPMENT INC.