GENERAL   EQUIPMENT   INC.                    

 

8724 Sunset Drive #191Miami FL 33173 · USA                                  

                                                  
Email:
info@generalequipment.infowww.generalequipment.info                                                       


 

 


KMT-6 MINE PLOUGH

 

 

TYPE:

Demining

DESCRIPTION:

KMT-6 Mine Plough

PRICE:

Upon Request

PACKING:

Ex-Works

 

 

kmt-6 mine plough

 

 

From new manufacture


 

 

ENGINEERING MINEPLOUGH

The Engineering Mine plough supplied by BEML is available in two versions: the Track Width Mine Plough (TWMP) and the Full Width Mine Plough (FWMP).

The TWMP has eight tines per side while the FWMP clears the whole width of the vehicle.

The FWMP and the TWMP are interchangeable.

The TWMP comprises two independent blades, left and right.

The hydraulic cylinder lowers and raises the equipment from the control box.

The FWMP is the TWMP with the addition of a third plough blade in the centre and two arms.

A TWMP can be converted into a FWMP.

The Mine plough can be fitted to any tank. A quick-fit mounting enables the Mine plough to be fitted or removed within 15 minutes. Existing eyes at the top of the toe plate are used to pin the plough in place, enabling the Mine plough to be fitted or removed within minutes.

 

KMT-6 MINE PLOUGH SPECIFICATIONS  
Type of article: Tread way, blade, digging up
Mass (with individual SPTA set) : 1000 kg
Length from vehicle nose upto front point of Anti-bottom mine sweeping device:  1190 mm
   
Width of article mounted on vehicle  
In traveling position: 3380 mm
In working position: 3870 mm
Running speed in working position  : 6 ~ 15 kmph
   
Surmountable obstacles  
Maximum ascent (decent): 23°
Maximum roll: 20°
Width of ditch: 2.5 m
Height of obstacle: 200 mm Max.
Depth of snow covering: 400 mm Max.

 

Specification and photos are not contractual and are subject to verification upon inspection

 

 

 

TAKE NOTICE!

 

PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PRE-EXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER ACKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.

 

This paper was prepared by General Equipment Inc.
The paper represents an offer of a partner of General Equipment Inc.
All rights are reserved by and for General Equipment Inc.
All content and ideas of this paper are the property of General Equipment Inc.

 

 

 

 


 

This transmission may include information on International Traffic in Arms Regulation (ITAR) (22 CFR-120-130) controlled items.  These controlled items may not be resold, diverted, transferred or transshipped outside of the United States or to any other country without U.S. State Department approval.

 

 

Defense items are subject to final destination approval and granting of an

export license issued by exporting country's authorities