Armored Ford Crown
ARMORED FORD CROWN VICTORIA
Ford Crown Victoria 4.6V8 High Output Engine armored to high protection
level B6 (EN 10/63 Std.)
Engine 4.6L V8 High Performance Power 239 hp @ 4750 rpm Transmission
Automatic Drivetrain 4x2 Seating Capacity 5 passenger Interior Leather
Equipment Alloy wheels with inserts, premium sound, power seats etc.
Applicable Standard CEN 1063
Armor Level B6
Construction Welded hermetically sealed with overlaps
Description of Protection Level
Door protection: B6 ballistic steel or ceramic/Twaron composite armor
Panel protection: B6 ballistic steel or ceramic/Twaron composite armor
Window protection: B6
Roof protection: B4
Firewall protection: B6
Rear Wheel-arch protection: B6
Floor protection: to simultaneous explosion of 2 DM 51 grenades
Battery protection: protection cage with lid B6
Computer unit & Fuse box protection: protection cage with lid B6
Multiple layers of float glass, PVB and Polycarbonate are laminated to form
transparent armor capable of defeating level B6 and below. Glasses are
finished up with a splinter protection shield (PC).
Floor areas are a dual skin construction armored with 2.5 mm of stainless
ballistic steel and bomb blanket, molded to form fit contours of floor
boards and panels. This is capable of defeating 2 German Ordnance DM51 hand
grenades detonated simultaneously in an area of one square meter
Where transparent armor and opaque armor meet additional armor is required
to prevent a ballistic orifice. For this reason overlapping armor is applied
to cover the transitions between transparent and opaque armor
Due to the extensive armoring the OEM Warrantee no longer applies to the
vehicle. Supplier warranty is against faulty workmanship and materials is 1
year unlimited miles and in strict accordance with the terms & conditions of
Supplier does not warrant against loss of life in any way.
Test Report and Certifications
Test reports by recognized testing facilities can be provided on request for
all the materials employed including glass, steel, ceramics and / or aramid
The supplier certifies that the armor retro fitted commercial vehicle has
been structurally modified to compensate for the additional weight to ensure
that the car is drivable and roadworthy. Specific attention is given to the
suspension, brakes and hinges. Due to increased load on the vehicle, parts
will wear sooner which can be prevented by regular and appropriate
Driver side window is operable by 4 inches to allow document and money pass-through.
An up-armored vehicle should be serviced at 5000 mile intervals. Due to
additional weight suspension, brakes and tires will need replacement more
often than a regular vehicle
Spare part availability
OEM Parts are available through the OEM distribution network.
Armor repair can be executed at an existing workshop specializing in armor
repairs. Steel armor can be readily replaced at their premises and the
required bodywork and painting can be done locally. Armor suppliers do not
keep stock of transparent armor, but replacement glass can be made to order
on relatively short notice.
Run flat tire inserts
All five wheels are fitted with run flat tire inserts
The following security options are available with those provided as standard
ticked. Please require price list of optional equipment available for the
Alarm / Immobilizer usually fitted as OEM equipment.
Multi-tone siren to provide audible signals
Central door locking system
Remote door locking system
Remote engine starter
Engine fire suppressant system
Lights kill switch
Cabin fire extinguisher
GSM and / or Satellite telephone
Emergency Egress Roof
Specification and photos are not contractual and
are subject to verification upon inspection
PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS
BASED ON PREXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY
DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION
THE RECEIVER AKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL
SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID
AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.
This paper was prepared by
General Equipment Corp.
The paper represents an offer of a partner of General Equipment Corp.
All rights are reserved by and for General Equipment Corp..
content and ideas of this paper are the property of General Equipment Corp.